EMERGENCY TELEPHONE: (574)457-2062
PREPARATION DATE: 8129100>
Revision Date: 11/2312004
Section 1 - Material Identification
Trade Name: Design Board (from 4 to 30 pcf per customer's specifications)
Chemical Name: Polyu rethane core stock
Chemical Family: polyu rethane
Section 2 - Hazardous Ingredients
Section 3 - Physical Data
Appearance and odor: odorless, colorless to amber; rigid material
Boiling point: NI A
Solubility in water: insoluble
Vapor density: NIA
Vapor pressure: NI A
Specific gravity (at various densities): N|A
Section 4 - Fire and Explosive Data
Flash point: NIA
Flammable Limits: LEL: N/A
Extinguishing Media: water, carbon dioxide, dry chemical, foam
Special fire fighting procedures: a self-contained breathing apparatus should
be worn to protect against decomposition products.
Unusual fire and explosion hazards: toxic vapors can be emitted during combustion.
Section 5 - Health Hazards
Nuisance dust may be generated when sawing, sanding or cutting rigid material.
Nuisance dust TLV: 10 mg/m3
Effects of overexposure: respiratory irritation may result from exposure to dust particles
First Aid procedures: treat symptomatically.
Section 6 - Reactivity
Conditions to avoid: excessive heat (to thermal decomposition)
Materials to avoid: strong oxidizers
Hazardous Decomposition Products: aromatic and aliphatic moieties; CO2
Hazardous Polymerization: will not occur.
Section 7 - Spill or Leak Procedures
Steps to be taken in case material is released or spilled: sweep up
Waste disposal method: any standard method for normal refuse in compliance with environmental
protection regulations. Where permitted, sanitary landfill is recommended.
Section 8 - Special Protection Information
Respiratory protection: may be required under processing conditions where dust levels
above TVL are generated.
Protective Gloves: not normally needed
Ventilation: local exhaust
Eye Protection: Safety goggles recommended anytime when working with material
Section 9 - Special Protection Information
Precautions to be taken in handling and storing; do not overheat.
A void breathing vapor produced at elevated temperatures. Information on this form is furnished solely for the purpose of compliance with the Occupational Safety and Health Act of 1970 and shall not be used for any other purpose. Use or
dissemination of all or any part of this information may result in a violation of law or constitute grounds for legal action.